DRIVER ATTENTION WARNING (DAW)*

Driver Attention Warning is designed to monitor the driver’s driving pattern. If DAW detects that the driver’s attention level becomes low, DAW is designed to display a message on the Instrument Cluster, “Consider taking a break,” and a warning sounds to recommend the driver take a break.If the vehicle is stopped, and Leading Vehicle Departure Alert (LVDA) is enabled, when a detected vehicle in front starts to depart, LVDA can inform the driver sounding an alert and displaying a message on the Instrument Cluster.

Reminders:

When activated, DAW does not display “Consider taking a break” message when the total trip driving time is less than 10 minutes
DAW will enter a standby mode if the camera does not detect the lanes and/or the
driving speed remains under 40 mph
Some driver assistance systems use a Haptic Warning, which alerts the driver
by gently pulsing the steering wheel when certain conditions are detected

DAW Settings:

Only adjust settings when the vehicle is at a standstill, gear shift is in Park and the ignition is on or the Engine Start/Stop button is in the ON position
To enable/disable LVDA in the Vehicle Settings in the Infotainment System – Press the SETUP key or the onscreen SETUP button. Press VEHICLE to enter Vehicle Settings. Select DRIVER ASSISTANCE, then DRIVER ATTENTION WARNING and select LEADING VEHICLE DEPARTURE ALERT

*See LEGAL page for legal information. Certain features are available on select Kia models.

When engaged, Driver Attention Warning is not a substitute for safe driving and may not detect all instances of inattentive driving practices. Failure to pay attention to travel conditions and vehicle operation could result in loss of vehicle control. Always drive safely and use caution.

Refer to section 9 in the Owner’s Manual for more information.

Using Guide

Download PDF