FCA is designed to detect and monitor a vehicle, pedestrian or cyclist ahead in the roadway, in certain circumstances, through front view camera recognition to warn the driver that a collision is imminent. FCA may temporarily apply emergency braking:  

• If FCA detects a potential collision, a warning will sound with a visual alert on the Instrument Cluster 
• If FCA detects that the collision risk has increased, FCA automatically applies the brakes to reduce your speed, potentially helping to reduce the effects of a possible collision 
  

Junction Turning - With the left turn signal on, if it detects a potential collision, Junction Turning may help to avoid the collision with an oncoming vehicle in an adjacent lane by applying emergency braking. 

Direct Oncoming Vehicle function - The Direct Oncoming Vehicle function may reduce the vehicle speed to help prevent a collision when a vehicle or powered two-wheeler is detected and approaching from the opposite direction. 

FCA Settings:

• FCA can be turned ON/OFF by going to the Vehicle Settings in the Infotainment System 
• Only adjust settings when the vehicle is at a standstill and the ignition is on or the Engine Start/Stop button is in the on position 
• To access Vehicle Settings in the Infotainment System – Press the SETUP key or the onscreen SETUP button. Press VEHICLE to enter Vehicle Settings. Select Driver Assistance and select Forward Safety 

When in the Driver Assistance / Driving Safety menu, select Forward Safety Warning Timing and one of the following:

• Standard: This setting allows for a nominal amount of distance between the vehicles before the initial warning occurs 
• Late: Reduces the amount of distance between the vehicles before the initial warning occurs 

FCA will become active when the: 

• Ignition is on or the Engine Start/Stop button is ON 
• Vehicle is traveling faster than 5 mph 
• Electronic Stability Control (ESC) is ON