Sunroof Operation
The Sunroof and Sunshade operation is controlled through a multidirectional switch 
, and the ignition needs to be in the ON position to operate the sunroof glass and sunshade.
backward to the farthest position and releaseforward to the farthest position and release
Tilt open: Press switch upward
Tilt close: Press switch forward
• To stop the Sunroof at any position, push or pull the Sunroof control switch in any direction
• While driving with the rear windows down or with the sunroof in an open or partially open position, a wind buffeting or pulsation noise may be heard. This noise is a normal occurrence and can be reduced or eliminated by the following:
— If the noise occurs with one or both of the rear windows down, partially lower both front windows approximately 1 inch
— If the noise occurs with the sunroof open, slightly reduce the size of the sunroof opening
• Sunshade needs to remain OPEN while Sunroof is open
• When closing, be mindful of any objects or persons
• If the sunroof is not fully closed, a warning will sound and display on the Instrument Cluster when the following occur:
— The vehicle is powered off
— The Smart Key is removed from the vehicle
— The driver’s door is opened
Certain features are available only on select Kia models.
Do not adjust the sunroof or sunshade while driving. This could result in loss of control of the vehicle. Button configuration may vary.
Images are for illustrative purposes only and may not reflect actual feature or operation. Refer to section 4 in the Owner’s Manual for more information.
