DRIVER ATTENTION WARNING (DAW)*

Driver Attention Warning is designed to monitor the driver’s driving pattern. If DAW detects that the driver’s attention level becomes low, DAW may display a message on the Instrument Cluster, “Consider taking a break,” and a warning sound to recommend the driver take a break. 

DAW Settings:

Only adjust settings when the vehicle is at a standstill, gear shift is in Park and the ignition is on or the Engine Start/Stop button* is in the ON position.

To enable/disable LVDA in User Settings in the Instrument Cluster -

  1. Press the Mode button on the Steering Wheel to toggle to User Settings
  2. Press the OK up/down to toggle to Driver Assistance, then Driver Attention Warning. Select Leading Vehicle Departure Alert to enable it

To enable/disable LVDA in Vehicle settings in the Infotainment System –

  1. Press the SETUP key or the onscreen SETUP button. Press VEHICLE to enter Vehicle Settings
  2. Select Driver Assistance, then Driver Attention Warning. Select Leading Vehicle Departure Alert to enable it

Reminders:

When activated, DAW does not display “Consider taking a break” message when the total trip driving time is less than 4 minutes.

*See LEGAL page for legal information. Certain features are available on select Kia models.

When engaged, Driver Attention Warning is not a substitute for safe driving and may not detect all instances of inattentive driving practices. Failure to pay attention to travel conditions and vehicle operation could result in loss of vehicle control. Always drive safely and use caution.

Refer to section 5 in the Owner’s Manual for more information.

Using Guide iconUsing Guide
PDF iconDownload PDF