DRIVER POSITION MEMORY SYSTEM*

The integrated system stores into memory the position of the Driver’s Seat and the Outside Rearview Mirrors.

To store positions into memory, first move the Rotary Dial Shifter into P (Park) while the ENGINE START/STOP button is in the ON position. Then:

  1. Adjust the Driver’s Seat and the Outside Mirrors
  2. Press the SET button on the control panel. System will beep once
  3. Press one of the memory buttons within 4 seconds. The system will beep twice when memory has been stored
  4. “Settings 1 (or 2) saved” will appear on the Instrument Cluster LCD screen

(Buttons located on Driver's Door Panel

Reminders:

  • Do not attempt to operate the driver position memory system while the vehicle is moving. This could result in loss of control of the vehicle.

*See LEGAL page for legal information. 

This feature may not be available on all Kia models. 

Button configuration may vary. Images are for illustrative purposes only and may not reflect actual feature or operation.

Refer to section 5 in the Owner’s Manual for more information.

Using Guide iconUsing Guide
PDF iconDownload PDF