Smart Cruise Control is designed to maintain a predetermined distance from vehicles detected ahead by automatically adjusting the driving speed in certain circumstances.

When traffic is detected, the vehicle is designed to automatically slow to maintain a set distance from traffic without depressing the accelerator or brake pedal. If SCC detects that the driver is attempting to overtake a vehicle in front, SCC may help by assisting acceleration.

SCC Operation: When SCC is on and activated, the vehicle distance set, and the system detects a vehicle slowing or stopping, SCC can bring the vehicle to a complete stop. When the vehicle ahead starts to move forward, SCC reengages. If the vehicle ahead stops for more than 3 seconds, the accelerator pedal or the button must be pressed to start moving the vehicle. SCC will accelerate the vehicle speed based on the Drive Mode selected on the Drive Mode Integrated Control System.

SCC can be set by going to the Vehicle Settings in the Infotainment System. Only adjust settings when the vehicle is at a standstill, gear shift is in Park and the ignition is on or the ENGINE START/STOP button is in the on position.

To access Vehicle Settings in the Infotainment System:

• Press the SETUP key or the onscreen SETUP button.
• Press VEHICLE to enter Vehicle Settings.
• Select Driver Assistance, Smart Cruise Control to set the distance, acceleration and the reaction speed

To turn on, set/adjust the SCC speed:

Press the Driving Assist button to turn the system ON and set to the current vehicle speed (One-Touch Set). The cruise indicator will illuminate on the Instrument Cluster. SCC may decrease the speed to maintain the distance with the vehicle in front.

• Increase speed: Press the switch up to increase the set vehicle speed
• Decrease speed: Press the switch down to decrease the set vehicle speed
• The indicator light, set speed and vehicle distance will illuminate on the Instrument Panel screen

To set the vehicle distance: Press the Vehicle Distance button on the steering wheel. The image on the Instrument Cluster LCD will change when scrolling through the settings. Each time the button is pressed, the vehicle distance changes

To pause or resume SCC operation: Press the pause/resume switch . The SCC indicator on the Instrument Panel will turn OFF.

To turn SCC OFF: Press the Driving Assist button . The SCC indicator on the Instrument Panel will turn GRAY.

To adjust the sensitivity of the SCC system:

• Go to Vehicle Settings in the Infotainment System by pressing the SETUP button.
• Go to DRIVING CONVENIENCE
• Then SMART CRUISE CONTROL and select BASED ON DRIVING STYLE or BASED ON DRIVING MODE.