The Smart Power Liftgate with Auto Open/Close can be operated from several controls to either open, close or lock the Liftgate. When the Smart Power Liftgate closes, it locks all doors and liftgate and arms the vehicle.
When the Smart Key fob is on your person and you are near the back of the vehicle, within close proximity, the hazard lights will blink and a chime will sound for about 3 seconds as an alert that the Smart Power Liftgate is about to open. Then the alert system will blink and chime again before opening the Smart Power Liftgate.
As you leave proximity of the vehicle, with the Smart Key fob on your person, the hazard lights will blink and a chime will sound that the Liftgate is about to close.
The Smart Power Liftgate feature is off by default. To enable the Smart Liftgate:
Opening/Closing from Inside the Vehicle: Press and hold the Smart Power Liftgate Open/Close button
to automatically open/close the Liftgate.

To open the Smart Power Liftgate, press and hold the Liftgate button
until the Liftgate begins to open. Press and hold again to automatically close.

Pulling the Liftgate upward by the handle or pressing the button a second time will interrupt the automatic opening of the Power Liftgate.
To open the Smart Power Liftgate automatically, press the Rear Hatch Release button
on the exterior of the Liftgate. Automatically close by pressing the Power Liftgate Close button
.


The height setting of a fully opened liftgate (tailgate) can be adjusted by
the following steps:
more than 3 secondsThe liftgate will then open to the set height.
To change setting again, repeat steps 1-3.


*See LEGAL page for legal information.This feature may not be available on all Kia models.
Refer to section 5 in the Owner’s Manual for more information. Button configuration may vary. Images are for illustrative purposes only and may not reflect actual feature or operation.