Forward Collision-Avoidance Assist 2 is de signed to detect a vehicle, a powered two-wheeler, a pedestrian, or a cyclist ahead on the road and may warn the driver of a possible collision with a warning message on the Instrument Cluster and a warning sound. 

If FCA2 detects an increased risk of collision, it may automatically apply the brakes or steer the vehicle to potentially reduce the effects of a possible collision  .

Junction Turning function  may help avoid a collision with an oncoming vehicle detected in an adjacent lane when turning left at a crossroad with the turn signal on by applying emergency braking. 

Junction Crossing function may help avoid a collision with oncoming vehicles detected on the left or right side when crossing an intersection by applying emergency braking. 

Direct Oncoming Response function may reduce the vehicle speed and temporarily apply braking when FCA 2 detects a vehicle is approaching directly in front. 

Lane-Change Oncoming function 

may help avoid a possible collision with a detected oncoming vehicle when changing lanes by assisting the driver’s steering. 

Lane-Change Side function 

may help avoid a possible collision with the vehicle detected ahead in the next lane when changing lanes by assisting the driver’s steering. 

Evasive Steering Assist function 

may help avoid a possible collision with a vehicle, pedestrian or cyclist detected ahead in the same lane. When a risk of collision is detected, Evasive Steering Assist function will warn the driver and if the driver steers to avoid collision it may assist the driver’s steering. 

FCA 2 Settings:

• FCA 2 features can be turned ON/OFF by going to the Vehicle Settings in the Infotainment System 
• To access settings, press the SETUP button on the Infotainment System. Select the VEHICLE button to enter the Vehicle Settings. Select DRIVER ASSISTANCE, and in DRIVING SAFETY, scroll through the selections and press the button to toggle the features on or off 

When in DRIVING SAFETY, select STANDARD or LATE. Use ‘Standard’ in normal driving conditions. If the Warning Timing seems sensitive, change it to ‘Late’ 

To adjust the Warning Methods settings, go to Vehicle Settings, Driver Assistance, and under WARNING METHODS, you can adjust the Warning Volume, activate Haptic Warning and Driving Safety Priority.

FCA 2 will become active when the: 

• Ignition is on or the Power button is ON 
• Vehicle is traveling faster than 6 mph 
• Electronic Stability Control (ESC) is ON