HIGHWAY DRIVING ASSIST 2 (HDA2)*

Highway Driving Assist 2 (HDA2) is designed to adjust the speed of the vehicle when driving on limited/controlled access highways/freeways.

Highway Lane Change Assist may assist in changing lanes, if the driver has turned on the turn signal and if the system detects the lane change is possible.

When HDA2 is activated and the proper conditions are met, the Instrument Cluster indicator will illuminate green. If proper conditions are not met, HDA2 will be in standby mode and the HDA2 indicator light will illuminate gray. When in operation, and if both lanes are detected, the Instrument Cluster will show the lanes illuminated white and the HDA2 indicator illuminated green .

HDA2 will operate when these conditions are met:

Driving on the main road of certain highways, and turning on Highway Driving Assist by pressing the Driving Assist button
Entering the main road of certain highways while Lane Following Assist and Smart Cruise Control are operating

HDA Settings:

To enable HDA2: press the SETUP button on the Infotainment System, VEHICLE, DRIVER ASSISTANCE, DRIVER CONVENIENCE, and select HIGHWAY DRIVING ASSIST
Select HIGHWAY LANE CHANGE ASSIST to activate this feature
Warning Methods: To adjust the Warning Volume settings, go to VEHICLE SETTINGS, DRIVER ASSISTANCE and under WARNING METHODS, you can adjust the Warning Volume, activate Haptic Warning and Driving Safety Priority.

Reminders:

Adjusting the Warning Methods will adjust settings for other driver assistance systems.

*See LEGAL page for legal information.

This feature may not be available on all Kia models.

When engaged, Highway Driving Assist is not a substitute for safe driving, may not detect all objects around the vehicle, and only functions on certain federal highways. Always drive safely and use caution.

See section 6 in the Owner’s Manual for more detailed information, limitations and conditions.

Using Guide

Download PDF