FCA is designed to detect a vehicle ahead or detect a pedestrian/cyclist in the roadway through front view camera recognition and front radar signals. FCA warns the driver that a collision is imminent, and if necessary, temporarily applies emergency braking. If FCA detects a potential collision, FCA emits an audible warning, steering wheel haptic warning, and visual alert on the Instrument Cluster .If FCA detects that the collision risk has increased, FCA automatically applies the brakes to reduce your speed , potentially helping to reduce the effects of a possible collision.

Junction Turning function may help avoid a collision with an oncoming vehicle detected in an adjacent lane when turning left at a crossroad with the turn signal on by applying emergency braking. 

Junction Crossing function may help avoid a collision with oncoming vehicles detected on the left or right side when crossing an intersection by applying emergency braking. 

Direct Oncoming Vehicle function* may help reduce the vehicle speed to help prevent a collision when a vehicle or powered two-wheeler is detected and approaching from the opposite direction. 

Lane-Change Oncoming function* may help avoid a possible collision with a detected oncoming vehicle when changing lanes by assisting the driver’s steering. 

Lane-Change Side function* may help mitigate or avoid a collection with vehicles or avoid a collision with vehicles or powered two-wheelers in the next lane when changing. 

Evasive Steering Assist function*

• **Driver Steering Assist ** may assist the driver in steering if a possible collision with a vehicle ahead, pedestrian, cyclist, or powered two-wheeler is detected and you steer to avoid the collision.
• Evasive Steering Assist may help mitigate or avoid a collision with a vehicle, pedestrian cyclist, etc. in the same lane in front of you. When a risk of collision is detected, Evasive Steering Assist may warn you and assist your steering if you move the steering wheel.

FCA 2 Settings:

• FCA is ON by default.
• FCA can be enabled or disabled in the Vehicle Settings in the Infotainment System.
• Make sure the vehicle is at a standstill, gear shift in Park and the Engine Start/Stop button* is in the ON position

Press the SETUP key or the onscreen SETUP button on the Infotainment System.

Press the VEHICLE button to enter Vehicle Settings.

In Driver Assistance, select Driving Safety, and then you may select Forward Safety, Forward Cross-Traffic Safety, and Forward/Side Safety.

To set the Warning Timing, in Driver Assistance, select Driving Safety, then in Forward Safety Warning Timing, select Standard or Late.

FCA will become active when the:

• Ignition is on or the Engine Start/Stop button is in the ON position
• Vehicle is traveling faster than 6 mph
• Electronic Stability Control (ESC) is ON