Plug-In Hybrid Charging & Connector
The Charging Connector can be set to be locked or unlocked while in the charging inlet and charging. To select the locking mode, go to the Vehicle Settings mode in the Infotainment System. Press the SETUP key on the Infotainment System or the SETUP button on the screen. Select VEHICLE, then ECO VEHICLE. Select CHARGING CONNECTOR LOCK.
If the charging connector does not disconnect as needed, open the luggage board in the trunk area, remove the storage box and slightly pull the emergency cable to disconnect the charging connector.
• If Charging Connector is in lock mode & the doors are unlocked, the charging connector unlocks, but if the charging cable is not disconnected within 10 seconds, the connector will automatically become locked again
• If the charging connector is unlocked but all the doors are locked again, immediately, the connector will automatically lock
• If charging does not work, disconnect the connector and try connecting again
Button configuration may vary. Images are for illustrative purposes only and may not reflect actual feature or operation.
For more information, refer to section 1 in the Owner’s Manual.
