Forward Collision-Avoidance Assist (FCA)

FCA is designed to detect and monitor a vehicle ahead or detect a pedestrian/cyclist in the roadway through front view camera recognition and front radar signals. FCA may warn the driver that a collision is imminent, and in certain situations may temporarily apply emergency braking. If FCA detects a potential collision, FCA emits an audible warning, steering wheel haptic warning, and visual alert on the Instrument Cluster .

If FCA detects that the collision risk has increased, FCA automatically applies the brakes to reduce your speed, potentially helping to reduce the effects of a possible collision.

Junction Turning - With the left turn signal on, if it detects a potential collision, Junction Turning may help to avoid the collision with an oncoming vehicle in an adjacent lane by applying emergency braking.Junction Crossing* - When approaching an intersection the Junction Crossing function* may help mitigate or avoid a collision with oncoming vehicles on the left or right side when crossing an intersection by applying emergency braking.

Direct Oncoming Vehicle function* - The Direct Oncoming Vehicle function may reduce the vehicle speed to help prevent a collision when a vehicle or powered two-wheeler is detected and approaching from the opposite direction.

**Lane-Change Oncoming vehicle function* - **Lane-Change Oncoming function may help mitigate or avoid a collision if it detects oncoming vehicles or powered two-wheelers when changing lanes by assisting the driver’s steering.

Lane-Change Side function* - Lane-Change Side function may help mitigate or avoid a collision if it detects vehicles or powered two-wheelers in the next lane when changing lanes by assisting the driver’s steering.

• FCA is on by default. FCA can be turned on/off by going to Vehicle Settings in the Infotainment System
• Only adjust settings when the vehicle is stopped, gear shift is in Park and the ignition is on or the Engine Start/Stop button is in the ON position
• To enable/disable in Vehicle settings in the Infotainment System: Press the SETUP key or the onscreen SETUP button. Press VEHICLE to enter Vehicle Settings. Select Driver Assistance, Driving Safety, then Forward Safety
• Forward Safety Warning Timing: When in Driver Assistance menu, select Forward Safety Warning Timing and select one of the following:

– Standard: This setting allows for a nominal amount of distance between vehicles before initial warning occurs

– Late: Reduces the amount of distance between the vehicles before the initial warning occurs

• **To adjust the warning volume: ** Press the SETUP button to go to VEHICLE SETTINGS on the Infotainment System. Press VEHICLE, DRIVER ASSISTANCE, and under WARNING METHODS, you can adjust WARNING VOLUME, and turn DRIVER SAFETY PRIORITY on or off