Lane Keeping Assist (LKA) is designed to detect the lane markers on the road, and in certain circumstances may warn the driver if the vehicle leaves the lane without using the turn signal, and assist with steering to potentially help keep the vehicle in the lane. When it is turned on, the Instrument Cluster indicator will initially illuminate white. It will remain white when the vehicle is traveling slower than 40 mph or when LKA does not detect the lane markers.

When LKA detects the lane markers and can assist the steering, the Lane Safety icon will illuminate green.

If LKA detects that you are moving outside of your lane, LKA may provide steering inputs to prevent the vehicle from moving outside its lane. If the vehicle continues to move outside of the lane, LKA may give a warning sound and display Lane Departure Warning message on the Instrument Cluster.

If the driver removes their hands from the steering wheel for several seconds, the system may use the in-cabin camera and steering input sensors to detect hands-off driving and display a warning message on the instrument cluster. If hands are not detected continuously, Lane Keeping Assist (LKA) will turn off and provide additional warning messages along with an emergency audible alert.

After enabling LKA, in the Vehicle Settings in the Infotainment System, press and hold the Lane Safety button to turn LKA on or off. 

Only adjust settings when the vehicle is at a standstill, gear shift is in Park and the ignition is on or the ENGINE START/STOP button is in the ON position.

To enable LKA in the Vehicle Settings:

• Press the SETUP key/button on the Infotainment System.
• Select the VEHICLE button to enter the Vehicle Settings.
• Select DRIVER ASSISTANCE, DRIVING SAFETY then LANE SAFETY.

LKA will operate under the following conditions: 

• The vehicle speed exceeds approximately 40 mph 
• LKA detects both sides of the lane markers the vehicle is traveling in 
• The vehicle is between the lane markers