Home/2027 Telluride Hybrid/Smart Cruise Control (SCC)
Smart Cruise Control (SCC) *

Smart Cruise Control is designed to detect a vehicle ahead and help maintain the set distance from the vehicle ahead and the set speed. When SCC detects the driver is attempting to overtake a vehicle in front, SCC may help by accelerating the vehicle speed. 

With SCC on and activated, and the vehicle distance set, when SCC detects a vehicle slowing or stopping, it can bring the vehicle to a complete stop. When the vehicle ahead starts to move forward, the SCC system re-engages. If the vehicle ahead stops for more than three seconds, press the accelerator pedal or press the plus/minus button on the Steering Wheel to start moving the vehicle. 

Smart Cruise Control will adjust acceleration based on the drive mode selected in the Drive Mode Integrated Control system. 

SCC Operation:

To turn SCC on: Press the Driving Assist button on the Steering Wheel to activate. The speed will be set to the current vehicle speed. SCC may decrease the speed to maintain the distance with the vehicle in front.

To adjust set speed: Press the switch up/down to increase/decrease the set speed.

To set the vehicle distance: Press the Vehicle Distance button on the steering wheel. The image on the LCD screen will change when scrolling through the settings. Each time the button is pressed, the vehicle distance changes .

To pause/resume SCC operation: Depress the brake pedal or press the Pause/Resume button . The cruise indicator on the Instrument Cluster will change.

To turn SCC off: Press the Driving Assist button . The cruise indicator on the Instrument Cluster will turn off.

Quick Tips:

  • Pressing the brake pedal cancels the SCC operation 
  • For SCC to operate:

– When no vehicle is in front, you must be traveling at a minimum speed of 5 mph

– When following a vehicle, there is no minimum speed requirement

– If your vehicle speed is between 0-20 mph when pressing the Driving 

Reminders:

  • SCC will not activate until the brake pedal has been depressed at least once after the ignition is on or engine started 
  • When following a vehicle, SCC will automatically adjust your vehicle speed based on the vehicle detected in front 
  • SCC is also canceled when the driver’s door is opened, gear shift is changed out of D (Drive), EPB is activated and various other conditions. See the Owner’s Manual for other conditions 
  • If SCC is left on, it can be activated inadvertently. Keep SCC off when not in use to avoid setting a speed that the driver is not aware of 
  • It is the responsibility of the driver to always check the speed and distance to the vehicle ahead 
  • SCC may decelerate if a surrounding vehicle intervenes in front of your vehicle 
  • SCC may not recognize unexpected and sudden situations or complex driving situations, so always pay attention to driving conditions and control your vehicle speed. It is the responsibility of the driver to always check the speed and distance to the vehicle ahead 

*See LEGAL page for legal information. Certain features are available on select Kia models

Button configuration may vary. Images are for illustrative purposes only and may not reflect actual feature or operation.

When engaged, SCC is a supplemental system and is not a substitute for safe driving. It is the responsibility of the driver to always check the speed and distance to the vehicle ahead.

See section 7 in the Owner’s Manual for more information. Images are for illustrative purposes only and may not reflect actual feature or operation.

Using Guide iconUsing Guide
PDF iconDownload PDF