Home/2027 Telluride Hybrid/Front / Rear Windshield Wipers & Washers

Front / Rear Windshield Wipers & Washers

To operate front Wipers and Washers:

Move lever Up/Down to change Wiper modes:

HI: Fast wipe

LO: Slow wipe

AUTO: Intermittent/Auto Rain Sensing

OFF: Wiper off

MIST: Single wipe

Pull lever to spray and wipe

To operate rear wipers & washers:

Rotate Rear Wiper switch to change Wiper modes

Push lever to spray and wipe

Auto Rain Sensing (Auto Control)

The rain sensor located on the upper end of the windshield glass is designed to sense the amount of rainfall and control the wiping cycle for the proper interval. The more it rains, the faster the wiper operates. When the rain stops, the wiper stops.

To turn on the Auto Rain Sensing wipers:

Move lever up/down to AUTO.
To adjust the auto rain sensing wiper speed setting, move the speed control switch up/down

Reminders:

Turn off Auto Rain Sensor when using a car wash.

Auto Rear Wiper

The feature can be enabled in the Vehicle Settings in the Infotainment System. When the lever is in the AUTO position, the gear shift is moved into Reverse, Auto Rear Wiper activates and will wipe the rear windshield.

Quick Tips:

When the Engine Start/Stop button is in the ON position and the wiper switch is in AUTO mode, the wiper will automatically operate once to perform a self-check of the system
Set the wiper to the OFF position when the wiper is not in use
Moving the lever to HI increases intermittent wipe frequency and wipe speed. Moving lever to LO decreases frequency of wipes
Pressing the button up increases Intermittent wipe frequency and wipe speed. Pressing the button down decreases frequency of wipes
On the Rear Wipers, intermittent wipe function is not adjustable

Certain features may not be available on all Kia models. Refer to section 4 in the Owner’s Manual for more information.

For illustrative purposes only. Your actual display, buttons and/or features may vary.

Using Guide

Download PDF